Binatone SYMPHONY 2210 User's Guide download pdf (Page 52)

“Last Number

Redial and/or

memory dialling

don’t work on

a PBX.”

When you first make a call, after keying in the outside

line access code (e.g. 9), press and hold the Last

Number Redial button until a

P appears on the display.

This inserts a pause between the access code and the

telephone number. You should later be able to redial

the number.

When storing numbers in memory, you can include the

outside line access code (e.g. 9) with each number.

If your PBX requires you to wait for a second Dial tone

before dialling the telephone number, press and hold

the Last Number Redial button for a pause

between the access code and the number.

If the fault persists …

Disconnect all other instruments connected to the

same line as the Symphony 2210 and see whether you

Disconnect the base unit from the telephone line and

plug a different phone into the master telephone

socket. Try making a call. If this works, the line is OK.

If the call does not work, and you are using a two-way

socket adapter, remove it and plug a telephone

directly into the socket. If the call now works, the

adapter may be faulty.

If you cannot make a call, the fault may be on the

exchange line. Contact the service provider.

If you still cannot identify the cause of the problem,

contact the Help Line on .

Troubleshooting

Color profile: Disabled

Composite Default screen

0845 345 9677

Binatone Help Line: 0845 345 9677

(Local Call rate)

can make a call.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57

No comments

Binatone SYMPHONY 2210 User's Guide Page 52