Binatone FM-4400 Installation Manual download pdf (Page 10)

Assembly

Sec. 3 Pg. 6

Fig. E

Step Procedure

Channel Assembly

Fig. E

3.1 Attach front and rear Cross Channel [11] to Single Piece Tank Brackets[10].

Note: Position Cross Channel [11] with flanges of Channel to rear of hoist.

Fasteners per Upper Tank Band: (4 ea.) 1/2” x 1-1/2” bolt, nut & lockwasher.

3.2 Attach Side Channels [13,14] with flanges of Channel facing inboard and square end

to rear, to Cross Channels [11] Fasteners per Channel: (8 ea.) 1/2” x 1-1/2” bolt, nut

& lockwasher with flatwasher on slotted holes.

Tip: For assembly by one person - A) Lift the rear of the Side Channel [14] into

position and temporarily secure it with a 1/2” x 5” bolt (found in parts bag). B)

Raise the front of the Side Channel and attach it loosely to the front cross Channel

[11] using 1/2” x 1-1/2” bolts. C) Return to the rear of the Side Channel, remove the

5” bolt, and secure using 1/2” x 1- 1/2” bolts

3.3 Attach center Cross Channel [11] to Side Channels [13,14]

Fasteners per Cross Channel: (8 ea.) 1/2” x 1-1/2” bolt, nut & lockwasher with

flatwasher on slotted holes.

HydroHoist Marine Group

Model: 4400/6600/ UL2FM

Publication: 10/14/08

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

No comments

Binatone FM-4400 Installation Manual Page 10