Binatone HD-1802 User Manual download pdf (Page 30)

yellobrik

OBD 1510 D

Serial and GPI Bidirectional Fiber Transceiver

 Bidirectional send and receive over single ﬁber link

 Extend serial and GPI connections up to 10km

 Supports serial RS232 or RS422 or RS485

 2 x GPI connections

 Singlemode ﬁber up to 10km (6.2 miles)

 LC/PC duplex ﬁber connections

 Switchable RX/TX crossover

 Automatic or manual data direction

 Switchable end of line termination

 ‘Plug and Play’ - No PC software drivers needed

 Supports all serial protocols (standard or proprietary)

 300 - 460K Baud (auto sensing and auto adjusting)

The OBD 1510 D is a pair of multi-function modules which will extend the reach

of serial RS232, RS422 or RS485 as well as two GPI (general purpose interface)

up to 10km (6.2 miles) over a single bidirectional ﬁber link (WDM)

A single RJ45 electrical serial connection can be conﬁgured for RS232,

RS422 or RS485 serial standards. A separate RJ45 connector is provided for

two electrical GPI inputs and outputs. Serial communications and GPI are

transmitted and extended over the same ﬁber link.

The OBD 1510 D is completely agnostic to the serial protocol used, and supports

all standard protocols and proprietary protocols at data rates from 300 to 460K

Baud

(auto sensing and auto adjusting).

The integrated dip switch provides precise control over the serial mode of

operation with selections for the

serial standard, serial termination, RX/TX

crossover and RS422/485 data direction (automatic or manual).

Data activity

LEDs are provided for the serial port and the GPI port under the respective RJ45

connectors.

The OBD 1510 D also supports mixing and matching of serial standards. For

example: the transmitting module can have a RS232 input, and the receiving

module can be set for RS422 output.

The OBD 1510 D is 100% plug and play, hot pluggable and no special software

drivers are required.

Technical Speciﬁcations

Serial I/O

EIA/ETA RS232C / RS422 / RS485 (selectable)

Connector - RJ45

Baud rate - Auto sense and auto adjust from 300 to 460K

Serial setting dip switch provides settings for:

• Select RS232 / RS422/485 modes

• Select serial termination (for end of line)

• RX/TX crossover to ﬂip the RX and TX if needed

• Set RS422/485 data direction to automatic or manual if needed

LED status indicators (under RJ45 connector). Serial RX and TX activity

RS422/485 Maximum number of electical nodes = 25

ESD protection for up to 26kV

GPI

2 x general purpose inputs + 2 x general purpose outputs

Connector - RJ45

GPI Inputs:

• External passive closure between pins (short) to trigger

• Max input switching frequency 25Hz (50 operations / second)

• Input insulation 3.75kV

GPI outputs:

• Internal contact closure (relay)

• Max switching frequency 25Hz (50 operations / second)

• Max switching power 220VDC / 0.25A or 250VAC / 0.25A

• Output insulation 3.75kV

LED status indicators (under RJ45 connector)

GPI Input 1 activity

GPI Input 2 activity

GPI Output 1 activity

GPI Output 2 activity

Fiber I/O

1 x ﬁber optic I/O port (bidirectional)

Simplex (single mode) using LC/PC Connection

WDM using 1310nm and 1550nm wavelengths

Optical budget = 18dB

Max distance 10km (6.2miles)

RX and TX activity LEDs on side of module next to ﬁber I/O

Power

+12VDC @ 0.25A power supplies (included)

Supports external power from 9 to 14VDC

Power LED on side of module

Size

105mm x 40mm x 22mm (4.13” x 1.57” x 0.86”)

Model #

OBD 1510 D

Includes

2 x OBD 1510 D modules (Type A and Type B), 2 x 12V DC power supplies,

transport case

Fiber Adapter Options

Model # LC/SC SIM

LC/PC to SC/PC Adapter

Model # LC/ST SIM

LC/PC to ST/PC Adapter

These adapters allows the use of ST or SC ﬁber connections on the

module. SMF 0.5m (19.6”) tail introduces less than 0.25dB attenuation.

Speciﬁcations subject to change

LYNXTechnik AG | Broadcast Television Equipment

www.lynx-technik.com

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

Comments to this Manuals

No comments

Binatone HD-1802 User Manual Page 30

Comments to this Manuals

Related products and manuals for Hair dryers Binatone HD-1802