Binatone HD-1802 User Manual download pdf (Page 32)

yellobrik

OET 1510

Ethernet to Fiber Transceiver (switch)

 Supports standard Ethernet inputs up to 1 Gbit

 3 port Ethernet switch (1 ﬁber, 2 electrical)

 Auto (10/100/1000) electrical port speed detection

 Manually force 10Mbit electrical speed (if needed)

 Fiber transceiver speed always 1 Gbit

 Auto or manual electrical crossover selection

 Distances up to 10km (6.2 miles) over SMF ﬁber

The OET 1510 is a compact 3 port Ethernet switch, designed

to extend the reach of electrical Ethernet signals over long

distances using a constant (ﬁxed) high speed 1 Gbit optical

transceiver speed.

When paired with another OET 1510 at the receiving end

(using two ﬁber links) you have a cost effective Ethernet

extender system for distances up to 10km providing a

stable, high speed 1Gbit error free optical connection

between locations.

The OET 1510 has two standard RJ45 electrical Ethernet

ports plus ﬁber I/O and functions as a 3 port Ethernet

switch. For legacy system use; each electrical Ethernet port

can be set for automatic speed detection (10/100/1000) or

forced to 10Mbit, and each port can use auto crossover

detection or be forced manually if needed. These functions

are available using the dip switch.

Fiber Optic Connection

LC Duplex (Singlemode) up to 10Km (6.2 miles)

(not included)

Technical Speciﬁcations

Ethernet

2 x Ethernet ports, RJ 45 Connectors.

10 BaseTUTP category 3,4 or 5 cable up to 328ft/100m (2 pairs)

100 BaseTXUTP category 5 cable up to 328ft/100m (2 pairs)

1000 BaseTXUTP category 5 cable up to 328ft/100m (4 pairs)

Auto detect bit rate (10/100/1000), or force to 10Mbit for

each port (selectable)

Automatic crossover detection or force manually for

each port (selectable)

Port speed / activity LED indication (next to Ethernet port)

Fiber Optic

1 x ﬁber optic input (TX)

1 x ﬁber optic output (RX)

Duplex (single mode) using LC/PC Connections

IEEE 802.3z

(1000BASE-X Gbit/s Ethernet over Fiber at 1 Gbit/s (125 MB/s)

Transmitter: 1310nm (-3dBm)

Receiver: 1260nm to 1620nm (-3dBm to -21dBm)

Fiber TX active and RX active LEDs on side of module

Max. distance 10km (6.2 miles - Singlemode)

Power

+12VDC power supply (included)

( supports external power input from 9 - 14 VDC )

Power LED on side of module

Size

105mm x 40mm x 22mm (4.13” x 1.57” x 0.86”)

Model #

OET 1510

Includes

Module, power supply, transport case

Options

Model# LC/SC DUP

LC/PC to SC/PC Adapter

Model# LC/ST DUP

LC/PC to ST/SC Adapter

These adapters allows the use of ST or SC ﬁber connections on the

module. SMF 0.5m (19.6”) tail introduces less than 0.25dB attenuation.

Speciﬁcations subject to change

LYNXTechnik AG | Broadcast Television Equipment

www.lynx-technik.com

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Comments to this Manuals

No comments

Binatone HD-1802 User Manual Page 32

Comments to this Manuals

Related products and manuals for Hair dryers Binatone HD-1802