Binatone BS-8020 User Manual download pdf (Page 6)

Note: if you stand on the scales earlier, the indication

«Err» will appear. If this happens, start the

procedure again.

3. Stand on the scales, evenly distributing the weight on the tray (1),

and do not move. Wait till the appliance calculates the result.

4. Get off the tray, and the scales will turn off automatically.

Note: if after adjustment to zero on the display of the scales

(2) you did not put any load on the tray (1), the

scales will turn off automatically within

approximately six seconds.

5. If the measured weight exceeds the allowable load (150 kg), the

display will show the indication of excess of the allowable load

«Err».

6. If the display of the scales (2) shows the indication «LO», it means

that the battery needs to be replaced. Open the cover of the com-

partment (3) and carefully take it out. Put the new battery in the

appliance, observing polarity (see picture B).

CARE AND CLEANING

1. Wipe the appliance with a damp lint free cloth,

wiping it dry, so that there are no water marks

on the tray (1). Do prevent water getting in-

side the appliance. Do not use hard abrasive

materials and substances for cleaning.

2. Always keep the appliance in a horizontal

position in a dry, cool place. Do not store the

appliance in places with high humidity or temperature.

DISPOSAL

This appliance should be disposed of in accor-

dance with waste disposal regulations in your coun-

try and with the least damage to the environment.

Only ecologically safe materials are used in the

packaging of our products and the cardboard and

paper can be disposed of with normal paper waste.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

No comments

Binatone BS-8020 User Manual Page 6